In Tasmania, Australia, concrete typically costs between $250 and $450 per cubic metre, depending on mix strength and finish, slightly higher than mainland averages due to transport and climate factors.
- Standard grey concrete: $250–$300/m³
- Reinforced concrete: $300–$400/m³
- Exposed aggregate: $350–$450/m³
Concrete Price m²:
Concrete Per m³: $250–$450
Concrete per m²: $60–$150
Driveway (per m²):$60–$120
Slab / Pad (per m²): $75–$130
Exposed Aggregate: $100–$150/m²
Polished Concrete: $60–$150/m²
Retaining Wall: $250–$400/m
Resurfacing: $40–$70/m²
Removal: $50–$90/m²
The cost of concrete depends on several factors, including the type of concrete, finish, and the size of your project. Let’s break down the average concrete cost per m³ and per m² in Australia, so you can budget more accurately.
Average Concrete Cost per m³ in Australia
The cost of concrete per m³ (cubic metre) typically ranges between $250 and $300, depending on the mix design, strength, and supplier.
However, when you include labour, preparation, and finishing, the total installed cost of concrete per m³ can reach $300 to $450.
Standard Grey Concrete: $250–$300/m³
Common for slabs and driveways
Reinforced Concrete: $300–$400/m³
Includes steel mesh or rebar
Exposed Aggregate Concrete: $350–$450/m³
Decorative finish, slip-resistant
Polished Concrete: $400–$600/m³
Ideal for indoor floors and commercial spaces
Pro Tip: For smaller residential projects, ready-mix suppliers often charge a short-load fee if you order less than 3m³, so always plan carefully.
How Much Does Concrete Cost per m²?
The cost of concrete per m² usually falls between $60 and $150, including materials, preparation, and labour.
Plain concrete is the most affordable, while exposed aggregate and polished concrete sit at the higher end of the range.
Plain Concrete: $60–$90/m²
Driveways, paths, and patios
Decorative/Coloured: $80–$110/m²
Outdoor entertainment areas
Exposed Aggregate: $100–$150/m²
High-end driveways and pool surrounds
Concrete Driveway Cost
A concrete driveway is one of the most popular upgrades for homes in Tasmania. It’s durable, low-maintenance, and increases curb appeal.
On average, the concrete driveway cost per square meter ranges from $60 to $120/m². That means a standard single-car driveway (18 m²) may cost around $1,200 to $2,000, while a double driveway (36 m²) could cost $2,500 to $4,000.
Plain Concrete Driveway: $60–$90/m²
Simple and affordable
Coloured Concrete Driveway: $70–$110/m²
Adds aesthetic value
Exposed Aggregate Driveway: $100–$150/m²
Premium look and durability
Concrete Slab & Pad Cost
For patios, garages, or shed bases, many homeowners ask: how much does a concrete slab cost?
- A concrete pad cost or concrete slab cost generally ranges between $75 and $130/m², depending on thickness and finish.
- A 5×5 concrete slab (25m²) typically costs around $1,875 to $3,250.
Shed Slab (100mm thick): $75–$90/m²
Garage Slab (125mm thick): $90–$120/m²
House Foundation Slab: $120–$160/m²
Exposed Aggregate Concrete Cost
If you’re after a decorative yet durable finish, exposed aggregate concrete is worth considering.
The exposed aggregate concrete cost in Australia averages $100–$150 per square metre, depending on the type of stone and level of polish.
This finish is perfect for:
- Driveways
- Pool surrounds
- Outdoor patios
- Pathways
Cost of Polished Concrete Flooring
Polished concrete floors have become a modern interior favourite due to their sleek appearance and longevity.
The cost of polished concrete flooring typically falls between $60 and $120 per m² for standard finishes, but high-gloss commercial-grade floors can go up to $150/m².
Matte Polish(residential interiors): $60–$80
High Gloss Polish(modern homes and offices): $80–$120
Decorative Polish(retail and commercial spaces): $120–$150
Concrete Retaining Wall & Pool Costs
If you’re planning landscaping or pool installations:
- Concrete sleeper retaining wall cost: $250–$400 per linear metre (depending on height and design).
- Cost of a concrete pool: $50,000–$80,000+ for a standard in-ground pool, depending on size and finish.
These are more specialised projects, but they use the same core material, reinforced concrete, with additional engineering and design costs.
Concrete Resurfacing & Removal Costs
For older or cracked driveways, concrete resurfacing can refresh the surface at a fraction of the cost of replacement.
- Concrete resurfacing cost: $40–$70 per m².
- Concrete removal cost: $50–$90 per m² (depending on thickness, access, and disposal fees).
Factors That Affect Concrete Costs
Several factors influence how much you’ll pay for your project:
- Location – Prices vary between regions; areas like Hobart, TAS may have slightly higher labour costs than regional towns.
- Site Accessibility – Hard-to-reach sites increase labour time.
- Thickness & Reinforcement – Thicker slabs and steel reinforcement add to the total.
- Finish Type – Decorative options (e.g., exposed aggregate or polished) are more labour-intensive.
- Pump Hire & Delivery Fees – For larger or elevated sites, concrete pumping adds extra cost.
Tasmania’s cooler climate, frequent rain, and regional logistics slightly increase concrete prices compared to mainland cities. Concreters in Hobart often adjust mix ratios to handle slower curing times and use locally sourced aggregates, which can influence both cost and quality. Additionally, delivery to hillside or coastal properties in areas like Kingston or Blackmans Bay may require pumping equipment, adding to total project cost.
Get an Accurate Quote for Your Concrete Project in Hobart
Every project is unique, that’s why getting a local, on-site quote is the best way to find out how much your concrete job will cost.
At Hobart Concrete Contractors, we provide transparent pricing, professional advice, and durable workmanship for all types of concrete installations, from driveways and slabs to retaining walls and decorative finishes.
Contact our local team today to get a free, no-obligation estimate for your next concrete project in Hobart, TAS and surrounding suburbs.
Conclusion
Concrete remains one of the most reliable and cost-effective materials for residential and commercial construction across Hobart and southern Tasmania.
From driveways to polished floors, the price you pay depends on mix strength, finish, and local labour rates.
In general:
- Plain concrete is the most affordable.
- Exposed aggregate and polished finishes cost more but offer long-term value and aesthetic appeal.
When budgeting, always consider site preparation, reinforcement, and delivery distance, these can significantly affect your final quote.
If you’re planning a concrete project in Hobart or southern Tasmania, consult a local concrete contractor familiar with regional pricing and standards. For more detailed cost insights, see our full Hobart concrete pricing guide.
Frequently Asked Questions
What’s the average cost of concrete in Tasmania?
The average cost of concrete in Tasmania is between $250 and $450 per cubic metre, depending on type and delivery location.
How much does a concrete driveway cost in Hobart?
A concrete driveway in Hobart costs around $60–$120 per square metre, with exposed aggregate being the premium option.
What’s the cost difference between plain and exposed aggregate concrete?
Exposed aggregate can cost 30–50% more than plain concrete due to extra materials and finishing work.
Is polished concrete expensive in Hobart homes?
Polished concrete floors are moderately priced at $60–$120 per m², but they last decades with minimal maintenance.
How much does a 5×5 concrete slab cost?
A 5×5 slab (25m²) costs around $1,875–$3,250, depending on thickness and reinforcement.
